M-ELV BattBank
AC-stackable C&I battery for factories and businesses
Atmoce M-ELV BattBank
Scale by module,
not by oversized cabinet
An AC-stackable C&I battery: add capacity one 16.08 kWh pack at a time to match the real load of your factory, shop or commercial building.
- Space-saving224 kWh in just 0.88 m² of floor space
- Low voltage, saferExtra-low voltage below 60 V with no high-voltage DC, eliminating the risk of DC arc faults
- Fast installationPlug & Play connections: installed in 1 hour, system activated in 5 minutes
Model MS-16K-U
The world’s first AC-stackable C&I battery
16.08 kWh per pack, stack up to 7 packs, 15-year lifespan
- 16.08 kWh
- Capacity per pack
- 8 / 10 kVA
- Rated / max. power
- Above 90%
- AC round-trip efficiency
- IP66
- Ingress protection
The EV Power Energy team analyses your load and surveys the site for free before designing the system.
Specifications
M-ELV BattBank MS-16K-U
| Item | Details |
|---|---|
| Model | MS-16K-U |
| Cell chemistry | Lithium iron phosphate (LFP) |
| Cell capacity | 314 Ah |
| Capacity per pack | 16.08 kWh |
| Rated output power | 8 kVA |
| Max. output power | 10 kVA |
| Max. stackable | 7 packs |
| AC round-trip efficiency | Above 90% |
| Cycle life | 10,000 cycles |
| Service life | 15 years |
| System voltage | Below 60 V (extra-low voltage) |
| Ingress protection | IP66 |
| Dimensions (W × H × D) | 880 mm × 300 mm × 483 mm |
Figures are from the manufacturer. Every real design starts with a load-profile analysis and a site survey.
Safe at the system level
and the pack level
Every pack has built-in fire suppression that triggers automatically at 170°C, an explosion-proof valve, and sensors guarding against over/under-voltage, overcurrent, short circuits, temperature and insulation faults.
Dual cooling with inert-gas fire suppression
Built for factories, shops
and commercial buildings
Store surplus solar for on-peak hours, cut demand charges and back up critical loads. IP66-rated for outdoor installation.
Monitor every pack in the app
Check the status of each battery pack in real time with Atmoce Cloud and the Atmozen app. VPP ready.
Frequently asked questions
How is the Atmoce M-ELV BattBank different from the M-ELV home battery?
BattBank is the commercial & industrial (C&I) model: 16.08 kWh per pack, up to 10 kVA, stackable to 7 packs. The M-ELV home model is 7 kWh.
How far can capacity be expanded?
Add one 16.08 kWh pack at a time, up to 7 packs per stack, and place several stacks side by side. The manufacturer quotes 224 kWh in just 0.88 m².
How safe is it for factory use?
The system runs below 60 V with no high-voltage DC. Every pack has fire suppression that triggers automatically at 170°C, an explosion-proof valve and multiple protective sensors.
What are the lifespan and cycle life?
15-year lifespan, 10,000 cycles, and AC round-trip efficiency above 90%.
Can it be installed outdoors?
Yes. The battery is rated IP66 for water and dust.
What services does EV Power Energy provide?
Load-profile analysis, a free site survey, system design and installation by the EV Power Energy team. Fill in the form on this page and we will contact you.
Get a quote for Atmoce M-ELV BattBank
The EV Power Energy team will analyse your load and survey your factory or business site for free.