SigenStor Neo all-in-one solar and battery system by Sigenergy
Sigenergy · New

SigenStor Neo

The all-in-one solar and battery system that gets smarter every time you power it on

Fully integrated

The simplest way to start with solar and storage

SigenStor Neo is a highly integrated all-in-one energy system, designed as the first choice for homes starting with solar and storage. With AI built in and the gateway integrated, it manages energy intelligently from day one.

2.5–15 kW
Single and three phase output
6–45 kWh
Battery capacity, 1–6 modules
0 ms
No interruption in an outage
IP66
Outdoor installation
Everything in one unit

Compact design

Everything in one unit

SigenStor Neo combines the energy management system (EMS), PV inverter, battery PCS, battery pack and backup module in one system, so it also works as the gateway.

No separate boxes to mount, a tidier wall and less wiring.

  • Compact size
  • All-in-One
  • Built-in backup module
Stackable battery modules, made easy

Grows with your usage

Stackable battery modules, made easy

Start with one battery module and stack up to six per controller, with quick connectors that make installation fast.

Every pack has a built-in optimizer, so old and new packs can be used together and you can add capacity later without replacing the whole set.

  • Modular design
  • Quick Connector
  • Mix old and new packs
SigenStor Neo battery safety

Safety in every pack

No compromise on battery safety

Large 314 / 392 Ah LiFePO₄ cells rated for 10,000 cycles with 100% depth of discharge, protected by 8 layers of battery safety covering detection plus active and passive fire prevention.

  • Fast charge & discharge
  • 8-layer all-round protection
  • Big battery cell
  1. 01Full-coverage temperature detection
  2. 02Fire extinguishing kit inside the pack
  3. 03High-temperature insulating pads in the pack wall
  4. 04Aerogel insulating pads between cells
  5. 05Humidity sensor in the pack
  6. 06Temperature monitoring at the quick connector
  7. 07Pressure relief valve in the pack
  8. 08Battery insulation monitoring

Energy integration, made simple

Uninterrupted through outages

The built-in backup port and Smart Port open the system to the whole home. In an outage the load side sees no interruption, and the system can deliver 200% of its rated power for 10 seconds for appliances with high start-up current.

SigenStor Neo mounted on a home wall
0 ms
Load-side disruption
200%
Peak power for 10 seconds
63 A
Whole-home backup
  • Key rooms firstKey rooms firstChoose which rooms or appliances must always stay powered.
  • In the order you setIn the order you setSet load priorities yourself in the app.
  • Whole-home backupWhole-home backupUp to 63 A passthrough keeps the whole home running through an outage.

Actual current and power depend on the installation and system configuration. Our team designs each system for the home.

Adaptable, powerful, robust

Built for homes in any weather

  • QuietNatural convection cooling with no fan, made for quiet neighbourhoods.
  • 10×Wider coverage with Sub-1G technology that passes through walls for a stable connection.
  • 4 MPPTHandles complex, multi-direction roofs and harvests more energy (single-phase models).
  • 0 msNo load-side interruption during an outage; appliances keep running.
  • IP66Dust and water protected against heavy rain and washdown, for indoor or outdoor installation.

SigenStor Neo Special Edition

7 kg lighter, 27% smaller

The SE is for single-phase homes at 2.5–6 kW. Its controller is only 280 mm tall and under 20 kg, and it uses the same batteries, stackable 1–6 modules.

SigenStor Neo

Controller size
800 × 360 × 235 mm
Weight
< 27 kg
Power (single phase)
2.5–12 kW
MPPT count
4 MPPT
Max. passthrough current
63 A

SigenStor Neo SE

Controller size
800 × 280 × 220 mm
Weight
< 20 kg
Power (single phase)
2.5–6 kW
MPPT count
2 MPPT
Max. passthrough current
45 A

AI that knows what you need

Knows your home's needs better every day

Just say what you need. The AI analyses the data, tunes the logic and configures your energy strategy automatically in the mySigen app.

mySigen app on a smartphone
  • 01Sigen AI Mode

    Schedules charging and discharging automatically around weather, tariffs and your household habits.

  • 02AI Strategy Planner

    Say what you want, such as “charge the battery to 80% before 5 p.m.”, and the AI sets it up.

  • 03Real-time Monitoring

    See real-time energy flow on the mySigen app home screen.

  • 04Energy Sankey Diagram

    Know where every watt comes from and goes: solar, battery, grid and loads.

  • 05Smart Load Management

    Monitor and manage smart loads such as a heat pump or EV charger.

Specifications

SigenStor Neo specifications

Sigen Energy Controller 2.5–12.0 kW single phase

Model2.5 SP3.0 SP3.6 SP4.6 SP5.0 SP6.0 SP8.0 SP10.0 SP12.0 SP
AC output power (kW)2.53.03.684.65.06.08.010.012.0
Max. PV power (kW)7.59.010.813.815.018.024.024.024.0
Backup peak power, 10 s (kVA)5.06.07.369.210.012.016.020.020.0
Peak efficiency97.8%97.8%97.9%97.9%97.9%97.8%97.9%97.9%97.9%
MPPT count
4
MPPT voltage range
40–565 V
Nominal voltage
220 / 230 / 240 V
Max. AC passthrough (grid → load)
63 A
Backup switch time (load side)
0 ms
Batteries per controller
1–6 modules
Dimensions (W × H × D)
800 × 360 × 235 mm
Weight
< 27 kg
Cooling
Natural convection
Ingress protection
IP66

Cycle life is from the cell maker, tested at 25±2 °C, 0.5C, to 60% SOH · 0 ms is the load-side switch time when the controller's rated power exceeds the total home load · Specifications may change without notice from Sigenergy

FAQ

Frequently asked questions

How is SigenStor Neo different from SigenStor?

SigenStor Neo is designed for homes starting with solar and storage. It has the backup module (gateway) built in, a more compact body, and uses Neo BAT 6.0 / 8.0 batteries. SigenStor is the 5-in-One system that can add an EV DC charger. Our team can compare both for your home's usage.

Are there single-phase and three-phase models?

Yes: single phase 2.5–12 kW and three phase 3–15 kW, plus the lighter, smaller single-phase Special Edition at 2.5–6 kW.

What is the maximum battery capacity?

Modules come in 6.02 kWh and 7.52 kWh, stackable 1–6 per controller, up to about 45 kWh.

Can it be added to a home that already has solar?

Yes. SigenStor Neo connects to your existing inverter through the Smart Port to add storage. Our team surveys the current system before recommending a model.

Can it be installed outdoors?

Yes. Both the controller and batteries are rated IP66 and can be floor-standing or wall-mounted.

Request SigenStor information

Get product details, prices and promotions

Add email (optional)
Chat on LINE

FacebookCall 090 456 6646

LINE